 |
 |
 |
|
Anti Vibe Bar Mount (1 1/8" bars) for Can-Am DS 450 for Stock Steering Stem
Can Am DS 450 Isovibe SX. Absorbs handle bar shock and vibration.
The Isovibe is better than standard anti-vibe steering stems that only absorb vibration. This new Isovibe SX absorbs vibration and shock in the forward, rearward, vertical and side to side directions. The Isovibe is also less expensive than adding a anti-vibe steering stem that costs hundreds more.
The main function of the Isovibe is to absorb vibration and shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps. If you've even landed a jump wrong on one side you've experienced the side to side impact to your wrists that sometimes rips the bars out of your hands. This new Isovibe SX will absorb this impact and keep you in control.
Adjustable handle bar deflection - simply add or remove shims between the bushings to increase or decrease the front to back deflection. Add or remove shims on the top and bottom sides of the bushings to increase or decrease the side to side deflection.
Two height options designed into the Isovibe SX. It will raise your bar mounting point by 1" or 1 1/2" over stock depending on how you mount it. Two bar offset options also. Same as stock or 1/2" forward bar offset.
This Isovibe SX model is for 1 1/8" bars. |
|
|
|
|
|
 |
|
 |
|
Features
- Absorbs handle bar shock and vibration.
- Absorbs vibration and shock in the forward, rearward, vertical and side to side directions.
- Less expensive than adding a anti-vibe steering stem that costs hundreds more.
- Absorb vibration and shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps.
- Adjustable handle bar deflection - simply add or remove shims between the bushings to increase or decrease the front to back deflection. Add or remove shims on the top and bottom sides of the bushings to increase or decrease the side to side deflection.
- Two height options designed into the Mount. Raise your bar mounting point by 1" or 1 1/2" over stock depending on how you mount it.
- Two bar offset options - Same as stock or 1/2" forward bar offset.
- This model is for 1 1/8" bars.
|
|
|
 |
|
 |
|
|
|
